Novastar MCTRL4K

MCTRL4K

Description

The MCTRL4K is a 4K×2K controller, that has a loading capacity up to 3840x2160@60Hz for each single unit. The MCTRL4K can support any custom resolution within this range as required, therefore meeting the on-site configuration requirements of super-wide or super-large LED displays.

In Multi-card mode, the MCTRL4K controller can be used as two independent controllers, making the images of two input sources perfectly displayed on the screen.

MCTRL4K also supports HDR function combined with A8s/A10s receiving card to greatly enhance the image quality of the connected screen, presenting more vivid and clearer images.

The device can be controlled by USB or Ethernet combined with the Novastar LCT software but it also has a build-in web interface for remote control.

If you need to cover a large distance between controller and Led screen, the MCTRL4K setup can be combined with CVT4K-S fibre convertor(101653) and 10G SFP modules(101623)

The MCTRL4K controller is mainly applied for medium to large events and control centres.

4K Controller
HDR10 supported
8/10/12-bit Colour Depth
DP1.2 / Dual-link DVI / HDMI 2.0
16 x Gigabit Ethernet output port
4 x Optical Fibre output port
GENLOCK

Available from PSCo for rental

Request Pricing

MCTRL4K Features

Input Resolution	3840x2160@60Hz, 3840x1080@60Hz, 1920x1080@60Hz
Capacity	8.2 million pixels
Supply Voltage	AC-100-240V-50/60HZ
Control Method	USB / Network Interface
Video Interface	1x DP1.2 / 2x dual-link DVI / 1x HDMI 2.0
Audio Interface
Video Format	RGB444, YCbCr4:2:0, YCbCr4:2:2, YCbCr4:4:4
Output Interface	4 x Fibre output ports, OPT1(out1-8); OPT2(out 9-16); OPT3/4 are backup for OPT1/2
Bit Depth of Video Resource	8/10/12bit